595d www.vishay.com vishay sprague revision: 08-jan-13 1 document number: 40007 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 solid tantalum chip capacitors t antamount ? , conformal coated, maximum cv features ? large capacitance rating range ? terminations: 100 % ti n (2) standard tin/lead available ? mounting: surface mount ? 8 mm, 12 mm tape and re el packaging available per eia 481 and reeling per iec 60286-3. 7" [178 mm] standard. 13" [330 mm] available. ? case code compatibility with eia 535baac and cecc 30801 ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note * lead (pb)-containing terminations are not rohs-compliant. exemptions may apply. performance characteristics www.vishay.com/doc?40088 operating temperature: - 55 c to + 125 c (above 85 c, voltage derating is required) capacitance range: 0.1 f to 1500 f capacitance tolerance: 10 %, 20 % standard voltage rating: 4 v dc to 50 v dc note ? preferred tolerances and reel sizes are in bold. we reserve the right to substitu te form-fit-function replacement products with higher voltage ra ting, tighter cap acitance toler ance, lower esr (e.g., 594d series), or increased reliability screening (t95 series). note ? the anode termination (d le ss b) will be a minimum of 0.012" [0.3 mm]. t case = 0.005" [0.13 mm] minimum. ordering information 595d 106 x0 010 a 2 t type capacitance capacitance tolerance dc voltage rating at + 85 c case code termination reel size and packaging this is expressed in pf. the first two digits are the significant figures. the third is the number of zeros to follow. x0 = 20 % x9 = 10 % this is expressed in v. to complete the three-digit block, zeros precede the voltage rating. a decimal point is indicated by an r (6r3 = 6.3 v). see ratings and case codes table 2 = 100 % tin 4 = gold plated 8 = solder plated (60/40) special order tape and reel t = 7" [178 mm] reel w = 13" [330 mm] reel dimensions in inches [millimeters] case code l max. w h a b d ref. j max. t 0.087 [2.2] 0.043 0.012 [1.1 0.3] 0.043 0.012 [1.1 0.3] 0.016 0.008 [0.4 0.2] 0.042 0.001 [1.07 0.25] 0.063 [1.6] 0.004 [0.1] s 0.134 [3.4] 0.067 0.008 [1.7 0.2] 0.051 0.008 [1.3 0.3] 0.031 0.012 [0.8 0.3] 0.079 0.012 [2.0 0.3] 0.087 [2.2] 0.004 [0.1] a 0.146 [3.7] 0.071 0.012 [1.8 0.3] 0.055 0.012 [1.4 0.3] 0.031 0.012 [0.8 0.3] 0.087 0.016 [2.2 0.4] 0.115 [2.9] 0.004 [0.1] m 0.142 [3.6] 0.106 0.012 [2.7 0.3] 0.067 0.012 [1.7 0.3] 0.031 0.012 [0.8 0.3] 0.079 0.012 [2.0 0.3] 0.253 [6.4] 0.004 [0.1] b 0.157 [4.0] 0.110 + 0.012/- 0.016 [2.8 + 0.3/- 0.4] 0.075 + 0.012/- 0.024 [1.9 + 0.3/- 0.6] 0.031 0.012 [0.8 0.3] 0.098 0.016 [2.5 0.4] 0.138 [3.5] 0.004 [0.1] c 0.280 [7.1] 0.126 0.012 [3.2 0.3] 0.098 0.012 [2.5 0.3] 0.051 0.012 [1.3 0.3] 0.181 0.024 [4.6 0.6] 0.236 [6.0] 0.004 [0.1] g 0.220 [5.6] 0.144 0.016 [3.65 0.4] 0.087 [2.2 max.] 0.051 0.012 [1.3 0.3] 0.134 0.016 [3.4 0.4] 0.236 [6.0] 0.004 [0.1] d 0.295 [7.5] 0.169 + 0.012/- 0.024 [4.3 + 0.3/- 0.6] 0.110 0.012 [2.8 0.3] 0.051 0.012 [1.3 0.3] 0.181 0.024 [4.6 0.6] 0.252 [6.4] 0.004 [0.1] r 0.283 [7.2] 0.236 + 0.012/- 0.024 [6.0 + 0.3/- 0.6] 0.138 + 0.012/- 0.016 [3.5 + 0.3/- 0.4] 0.051 0.012 [1.3 0.3] 0.181 0.024 [4.6 0.6] 0.244 [6.2] 0.004 [0.1] w j j h max. max. tantalum wire nib identifie s anode (+) terminal l d max. ref. a b
595d www.vishay.com vishay sprague revision: 08-jan-13 2 document number: 40007 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and case codes f 4 v 6.3 v 10 v 16 v 20 v 25 v 35 v 50 v 0.10 t 0.15 t 0.22 t/a 0.33 t a 0.47 t a a 0.68 t a a/b 1.0 ta a a/b 1.5 t a a/b b/c 2.2 t t/a a a/b b b/c 3.3 t/a a t a b b/c c 4.7 t a t/a a a/b b/c b/c c 6.8 t t/a a a a/b b/c c c/d 10 t/a a a a/b b b/c d d/r 15 a a a/b a/b b c c/d r 22 a/b a/b m/b b/c c/d d/r r 33 a/b s/a/b/c a/b b/c c/d r 47 a a/b b /c b/c c/d d/r r 68 a a/b b/c c/d c/d/r d/r 100 a/b m/b/c b/c/d c/d/r d/r r 120 c c c/d r r 150 b/c d c/d d/r d/r 180 d d d/r r r 220 c/d c/g/d c/d/r r 270 c/d r 330 c c/d/r d/r r 390 d r r 470 c/r d/r r 560 r 680 d r r 1000 r r 1500 r standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz ( ? ) max. ripple 100 khz i rms (a) 4 v dc at + 85 c, 2.7 v dc at + 125 c 4.7 t 595d475(1)004t(2)(3) 0.5 6 7.80 0.06 6.8 t 595d685(1)004t(2)(3) 0.5 6 7.80 0.06 10 t 595d106(1)004t(2)(3) 0.5 6 7.80 0.06 10 a 595d106(1)004a(2)(3) 0.5 6 1.90 0.20 15 a 595d156(1)004a(2)(3) 0.6 6 1.40 0.23 33 a 595d336(1)004a(2)(3) 1.3 6 1.40 0.23 33 b 595d336(1)004b(2)(3) 1.3 6 0.47 0.43 47 a 595d476(1)004a(2)(3) 1.9 6 1.40 0.23 68 a 595d686(1)004a(2)(3) 2.7 6 1.30 0.24 100 a 595d107(1)004a(2)(3) 4.0 12 0.60 0.35 100 b 595d107(1)004b(2)(3) 4.0 8 0.45 0.43 120 c 595d127(1)004c(2)(3) 4.8 8 0.19 0.76 150 b 595d157(1)004b(2)(3) 6.0 8 0.45 0.43 150 c 595d157(1)004c(2)(3) 6.0 8 0.18 0.78 180 d 595d187(1)004d(2)(3) 7.2 8 0.14 1.04 220 c 595d227(1)004c(2)(3) 8.8 8 0.18 0.78 220 d 595d227(1)004d(2)(3) 8.8 8 0.14 1.04 note ? part number definitions: (1) tolerance: for 10 % tolerance, specify x9; for 20 % tolerance, change to x0 (2) termination: for 100 % tin specify 2; for gold plat ed specify 4, for solder plated 60/40 specify 8 (3) packaging code: for 7" reels specify t, for 13" reels specify w
595d www.vishay.com vishay sprague revision: 08-jan-13 3 document number: 40007 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 4 v dc at + 85 c, 2.7 v dc at + 125 c 270 c 595d277(1)004c(2)(3) 10.8 8 0.17 0.80 270 d 595d277(1)004d(2)(3) 10.8 8 0.13 1.07 330 c 595d337(1)004c(2)(3) 13.2 8 0.17 0.80 390 d 595d397(1)004d(2)(3) 15.6 8 0.13 1.07 470 c 595d477(1)004c(2)(3) 18.8 10 0.16 0.83 470 r 595d477(1)004r(2)(3) 18.8 10 0.13 1.39 680 d 595d687(1)004d(2)(3) 27.2 12 0.13 1.07 1000 r 595d108(1)004r(2)(3) 40.0 16 0.07 1.89 1500 r 595d158(1)004r(2)(3) 60.0 20 0.07 1.89 6.3 v dc at + 85 c, 4 v dc at + 125 c 3.3 t 595d335(1)6r3t(2)(3) 0.5 6 8.50 0.06 3.3 a 595d335(1)6r3a(2)(3) 0.5 6 3.80 0.14 4.7 a 595d475(1)6r3a(2)(3) 0.5 6 3.80 0.14 6.8 t 595d685(1)6r3t(2)(3) 0.5 6 8.50 0.06 6.8 a 595d685(1)6r3a(2)(3) 0.5 6 3.60 0.14 10 a 595d106(1)6r3a(2)(3) 0.6 6 1.90 0.20 15 a 595d156(1)6r3a(2)(3) 0.9 6 1.70 0.21 22 a 595d226(1)6r3a(2)(3) 1.4 6 1.70 0.21 22 b 595d226(1)6r3b(2)(3) 1.4 6 0.57 0.39 33 s 595d336(1)6r3s(2)(3) 2.1 8 1.30 0.21 33 a 595d336(1)6r3a(2)(3) 2.1 6 1.70 0.21 33 b 595d336(1)6r3b(2)(3) 2.1 5 0.57 0.39 33 c 595d336(1)6r3c(2)(3) 2.1 9 0.29 0.62 47 a 595d476(1)6r3a(2)(3) 2.8 6 1.50 0.22 47 b 595d476(1)6r3b(2)(3) 2.8 5 0.57 0.39 68 a 595d686(1)6r3a(2)(3) 4.3 12 0.50 0.39 68 b 595d686(1)6r3b(2)(3) 4.3 6 0.55 0.39 100 m 595d107(1)6r3m(2)(3) 6.3 14 0.40 0.49 100 b 595d107(1)6r3b(2)(3) 6.3 8 0.55 0.39 100 c 595d107(1)6r3c(2)(3) 6.3 8 0.20 0.74 120 c 595d127(1)6r3c(2)(3) 7.6 8 0.19 0.76 150 d 595d157(1)6r3d(2)(3) 9.5 8 0.50 0.55 180 d 595d187(1)6r3d(2)(3) 11.3 8 0.14 1.04 220 c 595d227(1)6r3c(2)(3) 13.9 8 0.18 0.78 220 g 595d227(1)6r3g(2)(3) 13.9 8 0.18 0.80 220 d 595d227(1)6r3d(2)(3) 13.9 8 0.14 1.04 330 c 595d337(1)6r3c(2)(3) 20.8 8 0.17 0.80 330 d 595d337(1)6r3d(2)(3) 20.8 8 0.14 1.04 330 r 595d337(1)6r3r(2)(3) 20.8 8 0.13 1.39 390 r 595d397(1)6r3r(2)(3) 24.6 8 0.13 1.39 470 d 595d477(1)6r3d(2)(3) 29.6 8 0.13 1.07 470 r 595d477(1)6r3r(2)(3) 29.6 10 0.12 1.44 560 r 595d567(1)6r3r(2)(3) 35.3 10 0.11 1.51 680 r 595d687(1)6r3r(2)(3) 42.8 10 0.09 1.67 1000 r 595d108(1)6r3r(2)(3) 63.0 16 0.07 1.89 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz ( ? ) max. ripple 100 khz i rms (a) note ? part number definitions: (1) tolerance: for 10 % tolerance, specify x9; for 20 % tolerance, change to x0 (2) termination: for 100 % tin specify 2; for gold plat ed specify 4, for solder plated 60/40 specify 8 (3) packaging code: for 7" reels specify t, for 13" reels specify w
595d www.vishay.com vishay sprague revision: 08-jan-13 4 document number: 40007 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 10 v dc at + 85 c, 7 v dc at + 125 c 2.2 t 595d225(1)010t(2)(3) 0.5 6 8.60 0.06 3.3 a 595d335(1)010a(2)(3) 0.5 6 3.80 0.14 4.7 t 595d475(1)010t(2)(3) 0.5 6 8.60 0.06 4.7 a 595d475(1)010a(2)(3) 0.5 6 3.60 0.14 6.8 a 595d685(1)010a(2)(3) 0.7 6 3.60 0.14 10 a 595d106(1)010a(2)(3) 1.0 6 1.90 0.20 15 a 595d156(1)010a(2)(3) 1.5 6 1.80 0.20 15 b 595d156(1)010b(2)(3) 1.5 6 0.67 0.36 22 a 595d226(1)010a(2)(3) 2.2 6 1.80 0.20 22 b 595d226(1)010b(2)(3) 2.2 6 1.90 0.21 33 a 595d336(1)010a(2)(3) 3.3 8 3.00 0.16 33 b 595d336(1)010b(2)(3) 3.3 6 1.90 0.21 47 b 595d476(1)010b(2)(3) 4.7 6 0.65 0.36 47 c 595d476(1)010c(2)(3) 4.7 6 0.30 0.61 68 b 595d686(1)010b(2)(3) 6.8 6 0.65 0.36 68 c 595d686(1)010c(2)(3) 6.8 6 0.24 0.68 100 b 595d107(1)010b(2)(3) 10.0 12 0.40 0.46 100 c 595d107(1)010c(2)(3) 10.0 8 0.20 0.74 100 d 595d107(1)010d(2)(3) 8.0 7 0.15 1.00 120 c 595d127(1)010c(2)(3) 12.0 7 0.22 0.71 120 d 595d127(1)010d(2)(3) 12.0 8 0.14 1.04 150 c 595d157(1)010c(2)(3) 15.0 8 0.22 0.71 150 d 595d157(1)010d(2)(3) 15.0 8 0.14 1.04 180 d 595d187(1)010d(2)(3) 18.0 7 0.38 0.63 180 r 595d187(1)010r(2)(3) 18.0 8 0.13 1.39 220 c 595d227(1)010c(2)(3) 22.0 8 0.20 0.74 220 d 595d227(1)010d(2)(3) 22.0 8 0.14 1.04 220 r 595d227(1)010r(2)(3) 22.0 8 0.13 1.39 270 r 595d277(1)010r(2)(3) 27.0 8 0.13 1.39 330 d 595d337(1)010d(2)(3) 33.0 8 0.14 1.04 330 r 595d337(1)010r(2)(3) 33.0 8 0.13 1.39 390 r 595d397(1)010r(2)(3) 39.0 8 0.12 1.44 470 r 595d477(1)010r(2)(3) 47.0 8 0.12 1.44 680 r 595d687(1)010r(2)(3) 68.0 14 0.09 1.67 16 v dc at + 85 c, 10 v dc at + 125 c 1.5 t 595d155(1)016t(2)(3) 0.5 6 8.70 0.06 2.2 t 595d225(1)016t(2)(3) 0.5 6 8.70 0.06 2.2 a 595d225(1)016a(2)(3) 0.5 5 3.90 0.14 3.3 t 595d335(1)016t(2)(3) 0.5 6 8.60 0.06 4.7 a 595d475(1)016a(2)(3) 0.8 6 2.90 0.16 6.8 a 595d685(1)016a(2)(3) 1.1 6 2.80 0.16 10 a 595d106(1)016a(2)(3) 1.6 6 2.50 0.17 10 b 595d106(1)016b(2)(3) 1.6 6 0.76 0.33 15 a 595d156(1)016a(2)(3) 2.4 6 2.40 0.18 15 b 595d156(1)016b(2)(3) 2.4 6 0.75 0.34 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz ( ? ) max. ripple 100 khz i rms (a) note ? part number definitions: (1) tolerance: for 10 % tolerance, specify x9; for 20 % tolerance, change to x0 (2) termination: for 100 % tin specify 2; for gold plat ed specify 4, for solder plated 60/40 specify 8 (3) packaging code: for 7" reels specify t, for 13" reels specify w
595d www.vishay.com vishay sprague revision: 08-jan-13 5 document number: 40007 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 16 v dc at + 85 c, 10 v dc at + 125 c 22 m 595d226(1)016m(2)(3) 3.5 6 0.50 0.44 22 b 595d226(1)016b(2)(3) 3.5 6 0.75 0.34 33 b 595d336(1)016b(2)(3) 5.3 6 0.72 0.34 33 c 595d336(1)016c(2)(3) 5.3 6 0.29 0.62 47 b 595d476(1)016b(2)(3) 7.5 6 0.72 0.34 47 c 595d476(1)016c(2)(3) 7.5 6 0.28 0.63 68 c 595d686(1)016c(2)(3) 10.9 6 0.26 0.65 68 d 595d686(1)016d(2)(3) 10.9 6 0.14 1.04 100 c 595d107(1)016c(2)(3) 16.0 8 0.27 0.64 100 d 595d107(1)016d(2)(3) 16.0 8 0.14 1.04 100 r 595d107(1)016r(2)(3) 16.0 8 0.14 1.30 120 r 595d127(1)016r(2)(3) 19.2 8 0.14 1.34 150 d 595d157(1)016d(2)(3) 24.0 8 0.14 1.04 150 r 595d157(1)016r(2)(3) 24.0 8 0.13 1.39 180 r 595d187(1)016r(2)(3) 28.8 8 0.13 1.39 220 r 595d227(1)016r(2)(3) 35.2 8 0.12 1.44 330 r 595d337(1)016r(2)(3) 52.8 14 0.11 1.51 20 v dc at + 85 c, 13 v dc at + 125 c 0.68 t 595d684(1)020t(2)(3) 0.5 4 10.80 0.05 1.0 t 595d105(1)020t(2)(3) 0.5 4 9.00 0.06 2.2 a 595d225(1)020a(2)(3) 0.5 6 3.80 0.14 3.3 a 595d335(1)020a(2)(3) 0.7 6 3.80 0.14 4.7 a 595d475(1)020a(2)(3) 0.9 6 3.10 0.16 4.7 b 595d475(1)020b(2)(3) 0.9 6 0.95 0.30 6.8 a 595d685(1)020a(2)(3) 1.4 6 3.00 0.16 6.8 b 595d685(1)020b(2)(3) 1.4 6 0.95 0.30 10 b 595d106(1)020b(2)(3) 2.0 6 1.00 0.29 15 b 595d156(1)020b(2)(3) 3.0 6 1.00 0.29 22 b 595d226(1)020b(2)(3) 4.4 6 0.90 0.31 22 c 595d226(1)020c(2)(3) 4.4 6 0.38 0.54 47 c 595d476(1)020c(2)(3) 9.4 6 0.35 0.56 47 d 595d476(1)020d(2)(3) 9.4 6 0.19 0.89 68 c 595d686(1)020c(2)(3) 13.6 6 0.19 0.76 68 d 595d686(1)020d(2)(3) 13.6 6 0.19 0.89 68 r 595d686(1)020r(2)(3) 13.6 6 0.20 1.12 100 d 595d107(1)020d(2)(3) 20.0 8 0.18 0.91 100 r 595d107(1)020r(2)(3) 20.0 8 0.14 1.34 120 r 595d127(1)020r(2)(3) 24.0 8 0.14 1.34 150 d 595d157(1)020d(2)(3) 30.0 12 0.20 0.87 150 r 595d157(1)020r(2)(3) 30.0 8 0.14 1.34 180 r 595d187(1)020r(2)(3) 36.0 8 0.14 1.34 25 v dc at + 85 c, 17 v dc at + 125 c 0.47 t 595d474(1)025t(2)(3) 0.5 4 13.50 0.05 1.0 a 595d105(1)025a(2)(3) 0.5 4 4.20 0.13 1.5 a 595d155(1)025a(2)(3) 0.5 6 3.80 0.14 2.2 a 595d225(1)025a(2)(3) 0.6 6 3.80 0.14 2.2 b 595d225(1)025b(2)(3) 0.6 6 2.30 0.19 3.3 b 595d335(1)025b(2)(3) 0.8 6 1.90 0.21 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz ( ? ) max. ripple 100 khz i rms (a) note ? part number definitions: (1) tolerance: for 10 % tolerance, specify x9; for 20 % tolerance, change to x0 (2) termination: for 100 % tin specify 2; for gold plat ed specify 4, for solder plated 60/40 specify 8 (3) packaging code: for 7" reels specify t, for 13" reels specify w
595d www.vishay.com vishay sprague revision: 08-jan-13 6 document number: 40007 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 25 v dc at + 85 c, 17 v dc at + 125 c 4.7 b 595d475(1)025b(2)(3) 1.2 6 1.80 0.22 4.7 c 595d475(1)025c(2)(3) 1.3 5 0.68 0.40 6.8 b 595d685(1)025b(2)(3) 1.7 6 1.50 0.24 6.8 c 595d685(1)025c(2)(3) 1.7 6 0.63 0.42 10 b 595d106(1)025b(2)(3) 2.5 6 1.50 0.24 10 c 595d106(1)025c(2)(3) 2.5 6 0.57 0.44 15 c 595d156(1)025c(2)(3) 3.8 6 0.56 0.44 22 c 595d226(1)025c(2)(3) 5.5 6 0.50 0.47 22 d 595d226(1)025d(2)(3) 5.5 6 0.28 0.73 33 c 595d336(1)025c(2)(3) 8.3 6 0.45 0.49 33 d 595d336(1)025d(2)(3) 8.3 6 0.27 0.75 47 d 595d476(1)025d(2)(3) 11.8 6 0.26 0.76 47 r 595d476(1)025r(2)(3) 11.8 6 0.20 1.12 68 d 595d686(1)025d(2)(3) 17.0 8 0.26 0.76 68 r 595d686(1)025r(2)(3) 17.0 6 0.20 1.12 100 r 595d107(1)025r(2)(3) 25.0 8 0.20 1.12 35 v dc at + 85 c, 23 v dc at + 125 c 0.33 t 595d334(1)035t(2)(3) 0.5 4 14.40 0.05 0.47 a 595d474(1)035a(2)(3) 0.5 4 4.30 0.13 0.68 a 595d684(1)035a(2)(3) 0.5 4 4.20 0.13 1.0 a 595d105(1)035a(2)(3) 0.5 4 4.10 0.14 1.5 a 595d155(1)035a(2)(3) 0.5 6 3.80 0.14 1.5 b 595d155(1)035b(2)(3) 0.5 6 2.80 0.17 2.2 b 595d225(1)035b(2)(3) 0.8 6 2.30 0.19 3.3 b 595d335(1)035b(2)(3) 1.2 6 2.40 0.19 3.3 c 595d335(1)035c(2)(3) 1.2 6 0.75 0.38 4.7 b 595d475(1)035b(2)(3) 1.6 6 2.20 0.20 4.7 c 595d475(1)035c(2)(3) 1.6 6 0.66 0.41 6.8 c 595d685(1)035c(2)(3) 2.4 6 0.63 0.42 10 d 595d106(1)035d(2)(3) 3.5 6 0.43 0.59 15 c 595d156(1)035c(2)(3) 5.3 6 0.60 0.43 15 d 595d156(1)035d(2)(3) 5.3 6 0.41 0.60 22 d 595d226(1)035d(2)(3) 7.7 6 0.32 0.68 22 r 595d226(1)035r(2)(3) 7.7 6 0.28 0.94 33 r 595d336(1)035r(2)(3) 11.6 6 0.28 0.94 47 r 595d476(1)035r(2)(3) 16.5 6 0.28 0.94 50 v dc at + 85 c, 33 v dc at + 125 c 0.10 t 595d104(1)050t(2)(3) 0.5 4 22.50 0.04 0.15 t 595d154(1)050t(2)(3) 0.5 4 18.00 0.04 0.22 t 595d224(1)050t(2)(3) 0.5 4 15.30 0.04 0.22 a 595d224(1)050a(2)(3) 0.5 4 9.00 0.09 0.33 a 595d334(1)050a(2)(3) 0.5 4 8.10 0.10 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz ( ? ) max. ripple 100 khz i rms (a) note ? part number definitions: (1) tolerance: for 10 % tolerance, specify x9; for 20 % tolerance, change to x0 (2) termination: for 100 % tin specify 2; for gold plat ed specify 4, for solder plated 60/40 specify 8 (3) packaging code: for 7" reels specify t, for 13" reels specify w
595d www.vishay.com vishay sprague revision: 08-jan-13 7 document number: 40007 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 50 v dc at + 85 c, 33 v dc at + 125 c 0.47 a 595d474(1)050a(2)(3) 0.5 4 7.20 0.10 0.68 a 595d684(1)050a(2)(3) 0.5 4 6.10 0.11 0.68 b 595d684(1)050b(2)(3) 0.5 4 5.40 0.13 1.0 a 595d105(1)050a(2)(3) 0.5 4 6.00 0.11 1.0 b 595d105(1)050b(2)(3) 0.5 4 5.00 0.13 1.5 b 595d155(1)050b(2)(3) 0.8 6 4.10 0.14 1.5 c 595d155(1)050c(2)(3) 0.8 6 1.80 0.25 2.2 b 595d225(1)050b(2)(3) 1.1 6 3.20 0.16 2.2 c 595d225(1)050c(2)(3) 1.1 6 1.70 0.25 3.3 c 595d335(1)050c(2)(3) 1.7 6 1.60 0.26 4.7 c 595d475(1)050c(2)(3) 2.4 6 1.40 0.28 6.8 c 595d685(1)050c(2)(3) 3.4 6 1.30 0.29 6.8 d 595d685(1)050d(2)(3) 3.4 6 0.82 0.43 10 d 595d106(1)050d(2)(3) 5.0 6 0.80 0.43 10 r 595d106(1)050r(2)(3) 5.0 6 0.65 0.62 15 r 595d156(1)050r(2)(3) 7.5 6 0.40 0.79 22 r 595d226(1)050r(2)(3) 11.0 6 0.39 0.80 recommended voltage derating guidelines (for temperature below + 85 c) standard conditions. for example: output filters capacitor voltage rating operating voltage 4.0 2.5 6.3 3.6 10 6.0 16 10 20 12 25 15 35 24 50 28 severe conditions. for example: input filters capacitor voltage rating operating voltage 4.0 2.5 6.3 3.3 10 5.0 16 8.0 20 10 25 12 35 15 50 24 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz ( ? ) max. ripple 100 khz i rms (a) note ? part number definitions: (1) tolerance: for 10 % tolerance, specify x9; for 20 % tolerance, change to x0 (2) termination: for 100 % tin specify 2; for gold plat ed specify 4, for solder plated 60/40 specify 8 (3) packaging code: for 7" reels specify t, for 13" reels specify w
595d www.vishay.com vishay sprague revision: 08-jan-13 8 document number: 40007 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical curves at + 25 c, impedance and esr vs. frequency t case 10 000 1000 100 10 1.0 impedance esr 0.1 f, 50 v dc 3.3 f, 6.3 v dc ? frequency in hz 100 1k 10k 100k 1m 10m a case 1000 100 10 1.0 0.1 impedance esr 1 f, 35 v dc 15 f, 6.3 v dc frequency in hz 100 1k 10k 100k 1m 10m ? 100 1k 10k 100k 1m 10m 1000 100 10 1 0.1 2.2 f, 35 v dc 22 f, 6.3 v dc impedance esr frequency in hz b case ? c case 1.0 10 100 1000 0.1 0.01 impedance esr 10 f, 25 v dc frequency in hz 100 f, 6.3 v dc 100 1k 10k 100k 1m 10m ? d case frequency in hz 100 10 1.0 0.1 0.01 impedance esr 220 f, 6.3 v dc 22 f, 25 v dc 100 1k 10k 100k 1m 10m ? r case frequency in hz ? 100 10 1.0 0.1 0.01 impedance esr 33 f, 35 v dc 390 f, 6.3 v dc 100 1k 10k 100k 1m 10m
595d www.vishay.com vishay sprague revision: 08-jan-13 9 document number: 40007 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 power dissipation case code maximum permissible power dissipation at + 25 c (w) in free air a0.075 b0.085 c0.110 d0.150 g0.115 m0.095 r0.250 s0.060 t0.030 standard packaging quantity case code units per reel 7" reel 13" reel a 2000 9000 b 2000 8000 c 500 3000 d 500 2500 g 500 2500 m 2000 8000 r 600 n/a s 2500 10 000 t 2500 10 000 product information conformal coated guide www.vishay.com/doc?40150 moisture sensitivity www.vishay.com/doc?40135 selector guides solid tantalum selector guide www.vishay.com/doc?49053 solid tantalum chip capacitors www.vishay.com/doc?40091 faq frequently asked questions www.vishay.com/doc?40110
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
